home · games · tech info · articles · about · contact us
Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Stargate Panel.html (html file)]

Stargate control panel layout and measurements 
Typed by Franklin Bowen (bowens@erols.com) 4/8/96

================================================================================
Here's the layout (courtesy of Steve Hawley -  hawley@adobe.com)


                 (1)     (2)

          O                     (T)(F)
           (R)                (S)
                     (H)    (I)

1,2 - 1 and 2 player start, tranparent red
O - up,down lever, red (can use a Joust stick)
R reverse, white
T thrust, white
F fire, white
S smart bomb, green
I inviso, red
H hyperspace, white

FYI, the defender layout was identical except that the 1 & 2 player
start buttons were white and there was no inviso.  The wiring harness
for stargate will work on a Defender board set.
================================================================================


================================================================================
All measurements are in cm

- plywood is 1.9 thick


          17.1
       *----------
       |A  14.7    ^
       |           |
 14.7  | 11.6    17.2        (from side)
       |           |
       |B  7.35    v
       *------
         9.05

* is rounded and around 2.1 cm thick
- Angle A is 99 o while angle B is 101 o.
================================================================================



  (looking down on top of control panel)

                                   <- 62 ->
 *----------------------------------------------------------------------------*
 |                                                                            |
 |    2.5                                                                     |
 |     -                         4.7       4.7            4.7  4.7            |
 |    | |                   27.15 O         O 27.15         O   O 11.75       |
 |    | |                                                   <- 15.5 ->        |
 |12.9|O|                                               7.65                  |
 |    | |                                                O 18.4               |
 |    | | 9.7                                                                 |
 |     -   O                                        10.65                     |
 |<- 18.5 ->                                          O 21.25                 |
 |                               29.45 O 29.45                                |
 |                                    4.7                                     |
 *----------------------------------------------------------------------------*

- Os are buttons and joystick
- measurements are from CENTER of button hole THROUGH the number
- measurements are from the EDGE of the joystick THROUGH the number
- the measurements from the bottom would be if it was UNROUNDED!
- rounding starts 15.4cm from top
- button holes are 2.95-3cm across
- channel for joy is 2.45cm wide and ABOUT 6.7-7cm long